Python Script Open and Write into Terminal

Question

I have a Python script on my Raspberry Pi 3 Model B (OS NOOBS) that when run, logs the temperature of the CPU into a .csv file every minute. What I'd like to know is how can I, from a Python script open a terminal and output the temperature in the terminal rather than log it into the .csv file? This is the code that I've written so far: ``` from gpiozero import CPUTemperature from time import sleep, strftime, time cpu = CPUTemperature() def output_temp(temp): with open("cpu_temp.csv", "a") as log: log.write("{0}, {1}
".format(strftime("%Y-%m-%d %H:&M:%S"),str(temp))) while True: temp = cpu.temperature output_temp(temp) sleep(60) ``` I'm planning on using what I'm asking for so when the temperature goes above 'x' degrees, the terminal will open, print the temperature there until it drops down below the 'x' mark again. However I'll figure that remaining part on my own as I'm a newbie whom is still learning. But I am stuck on the part where I want to open the terminal and print the vari…

Accepted Answer

I can not test it on raspberry, but OS NOOBS should have `lxterminal` available and the following code should work. If there is no `lxterminal` on your system, install it or try replacing it in code below with `xterm` or `gnome-terminal` etc. Tested on Ubuntu 16.

```
import os
import time
import subprocess

# create custom pipe file
PIPE_PATH = "/tmp/my_pipe"
if os.path.exists(PIPE_PATH):
    os.remove(PIPE_PATH)
    os.mkfifo(PIPE_PATH)

# open terminal that reads from your pipe file
a = subprocess.Popen(['lxterminal', '-e', 'tail --follow {0}'.format(PIPE_PATH)])

# write to file and it will be displayed in the terminal window
message = "some message to terminal
"
with open(PIPE_PATH, "w") as p:
    p.write(message)

time.sleep(5)

# close the terminal
a.terminate()
```

You can adjust the writing to file and sleep according to your needs. :)

Python Script Open and Write into Terminal

Solution

Problem