verilog "~" operator in addition operation gives unwanted result

system-verilog, verilog

Solution

The operands of the add operator need to be extended to the size of left hand side (or the max width of the two operands depending on the context) before the addition is done.

In this case `mode_u2` needs to be extended to 32 bits. I wasn't able to find a reference for this, but looks like the bit extension has precedence over the `~` operator. That means:

depth = 'h80 + (~mode_u2) = 
         32'h0000_0080 + (~32h0000_0000) = 
         32'h0000_0080 + 32'hffff_ffff = 
         32'h0000_007f

The result of `!` operator, however by definition is a single bit, and my guess is that the bit extension happens twice:

depth = 'h80 + (!mode_u2) = 
         32'h0000_0080 + (!32'h0000_0000) = 
         32'h0000_0080 + 1'h1 = 
         32'h0000_0080 + 32'h0000_0001 = 
         32'h0000_0081

Similarly for `mode`:

depth = 'h80 + (~mode) = 
         32'h0000_0080 + (~32'h0000_0001) = 
         32'h0000_0080 + 32'hffff_fffe = 
         32'h0000_007e

Problem

In the following simplified Verilog code: ``` wire [31:0] depth; wire mode_u2 = 1'h0; assign depth = 'h80 + (~mode_u2); ``` if I do a display on depth, and simulate it with VCS (2014.12-1) ``` $display("depth is 0x%2x", depth); ``` i'm getting `0x7f`, instead of expected `0x81`. it seems like ~mode_u2 is treated as minus 1. If I change `~mode_u2` to `!mode_u2`. I get 0x81 as expected. what's more interesting is if i do `wire mode = ~mode_u2` and then `assign depth = 'h80 + (~mode)` instead of `0x80`, i get `0x7e` Am I missing something here? Can someone explain why `~` behaves this way in a `+` operation? Or is this one of those simulation and synthesis being different situation? Many thanks!! Willie

Original source