Monitoring Reachability with AFNetworking only on a presented controller

afnetworking, afnetworking-2, ios, ios6, reachability

Solution

Unfortunately no, there isn't an easier way to do this.

However, the plan you mentioned doesn't sound all that bad. You essentially are asking the manager to turn it's notifications off and on, and it needs you to tell it when to do so.

Here's how I do it:

- (void)viewWillAppear:(BOOL)animated
{
    [super viewWillAppear:animated];
    [manager startMonitoring];
}

- (void)viewWillDisappear:(BOOL)animated
{
    [super viewWillDisappear:animated];
    [manager stopMonitoring];
}

Problem

I am using AFNetworking 2.0 to monitor Reachability. In the viewDidLoad of my main VC I have the following: ``` // Start monitoring the internet connection [[AFNetworkReachabilityManager sharedManager] startMonitoring]; [[AFNetworkReachabilityManager sharedManager] setReachabilityStatusChangeBlock:^(AFNetworkReachabilityStatus status) { NSLog(@"Reachability: %@", AFStringFromNetworkReachabilityStatus(status)); // Check the reachability status and show an alert if the internet connection is not available switch (status) { case -1: // AFNetworkReachabilityStatusUnknown = -1, NSLog(@"The reachability status is Unknown"); [self reachabilityNotReachableAlert]; case 0: // AFNetworkReachabilityStatusNotReachable = 0 NSLog(@"The reachability status is not reachable"); [self reachabilityNotReachableAlert]; case 1: // AFNetworkReachabilityStatusReachableViaWWAN = 1 NSLog(@"The reachability status is reachable via WWAN"); case 2: // AFNetworkReachabilityStatusReachableViaWiFi = 2 NSLog(@"The reachability status is reachable via WiFi"); break; default: break; } }]; ``` On top of this main VC I load different view controllers/paths/navigation controllers and dismiss once they have been used. Question What I am trying to do is monitor the connection but only when the main VC is displayed. For example, if I load a navigation controller on top of the main VC and the connection is lost I would still get the call to the `reachabilityNotReachableAlert`. How can I only monitor when the main VC is displayed on screen, without having to run `stopMonitoring` and `startMonitoring` all the time? I guess I can put the `stopMonitoring` in the `prepareForSegue` method and then `startMonitoring` in the `viewDidAppear`, is there not an easier way to do this?

Original source