Mixing 16 bit linear PCM streams and avoiding clipping/overflow

audio, c, mixing, pcm, signal-processing

Solution

here's a descriptive implementation:

short int mix_sample(short int sample1, short int sample2) {
    const int32_t result(static_cast<int32_t>(sample1) + static_cast<int32_t>(sample2));
    typedef std::numeric_limits<short int> Range;
    if (Range::max() < result)
        return Range::max();
    else if (Range::min() > result)
        return Range::min();
    else
        return result;
}

to mix, it's just add and clip!

to avoid clipping artifacts, you will want to use saturation or a limiter. ideally, you will have a small `int32_t` buffer with a small amount of lookahead. this will introduce latency.

more common than limiting everywhere, is to leave a few bits' worth of 'headroom' in your signal.

Problem

I've trying to mix together 2 16bit linear PCM audio streams and I can't seem to overcome the noise issues. I think they are coming from overflow when mixing samples together. I have following function ... ``` short int mix_sample(short int sample1, short int sample2) { return #mixing_algorithm#; } ``` ... and here's what I have tried as #mixing_algorithm# ``` sample1/2 + sample2/2 2*(sample1 + sample2) - 2*(sample1*sample2) - 65535 (sample1 + sample2) - sample1*sample2 (sample1 + sample2) - sample1*sample2 - 65535 (sample1 + sample2) - ((sample1*sample2) >> 0x10) // same as divide by 65535 ``` Some of them have produced better results than others but even the best result contained quite a lot of noise. Any ideas how to solve it?

Original source